Electronic Grinding Gauges

For External Dia. Consisting of Electronic Controller with Touch DIPLAY and MEMBRANE KEYPAD and has three relay signal outp1ut for Coarse feed, fine feed and finish wheel retraction after dia. is ground to size 

The measuring head is a Swing ARM Type with

LVDT Transducers including Inter Changeable Caliper for Diameters from 7mm to 65mm or 65mm to 125mm.Diamond contact Points, Dashpot Assembly for mounting head to the machine..

TOUCH SCREEN ADVANTAGES 

• Industrial Color TFT Touch HMI display with PLC inbuilt  with IP66
• Pluggable I/O Module Support
• Suitable for In process , Multi Dia Grinding Gauge , Flagging  applications, Comparator , 
• Control setting are password protected.
• User friendly icon used for easy operation  
• Relay output and Digital Inputs status can be
• viewed from the displays screen itself , no need to open the box and check the conditions of Relay ON/OFF , Cycle start inputs , etc
• Less wiring with inbuilt smart Relay for machine

Interface 

• Universal 24VDC SMPS used with EMI /EMC Compatibility and hence it protects the equipment from external noises and safe guard…  
• Wheel dress Alarm facility is available. It alerts the operator when the wheel dress count reaches the qty ,
• Job count SET/ RESET facility available Real time date facility available , you can change time , date etc
• Digital input / Digital output, Analog input Module can be expandable on additional chargeable basis.

Has a fully Automatic cycle with automatic hydraulic twin cylinder movement of probe head. It has two electronic probe fingers, which measures the diameters. Once the preset diameter is reached, The wheel is retracted and the cylinder also retracts with the probe head.

The electronic controller is with Touch screen DISPLAY and MEMBRANE KEYPAD and has three relay signal output for coarse feed, find ground to size. Measuring range 5mm 90mm.

SCOPE OF SUPPLY; -

• 1SET – A5 TOUCH SCREEN CONTROLLER 
• 1 NOS -HYDRAULIC CYLINDER.
• 1 NOS - MOUNTING BRACKET  
• 1 NOS -TPM MEASURING GAUGE HEAD

ADVANTAGES OF TOUCH SCREEN 

• Industrial Color TFT Touch HMI display with PLC inbuilt  with IP66
• Pluggable I/O Module Support
• Suitable for In process , Multi Dia Grinding Gauge , Flagging  applications, Comparator , 
• Control setting are password protected.
• User friendly icon used for easy operation  
• Relay output and Digital Inputs status can be viewed from the displays screen itself , no need to open the box and check the conditions of Relay ON/OFF , Cycle start inputs , etc
• Less wiring with inbuilt smart Relay for machine

Interface

Universal 24VDC SMPS used with EMI /EMC

Compatibility and hence it protects the equipment from external noises and safe guard…   

Wheel dress Alarm facility is available. It alerts the operator when the wheel dress count reaches the qty ,

Job count SET/ RESET facility available 

Real time date facility available , you can change time , date etc 

Digital input / Digital output, Analog input

Has a fully Automatic cycle with automatic hydraulic twin cylinder movement of probe head. It has two electronic probe fingers, which measures the diameters. Once the preset diameter is reached, The wheel is retracted and the cylinder also retracts with the probe head.

The electronic controller is with LCD DISPLAY and MEMBRANE KEYPAD and has three relay signal output for coarse feed, find ground to size. Measuring range 5mm 90mm.

SCOPE OF SUPPLY; -

• 1SET - T5 CONTROLLER (DISPLAY)  
• 1 NOS -HYDRAULIC CYLINDER.
• 1 NOS - MOUNTING BRACKET  
• 1 NOS -TPM MEASURING GAUGE HEAD

For External Dia. Consisting of Electronic Controller with LCD DIPLAY and MEMBRANE KEYPAD and has three relay signal outp1ut for Coarse feed, fine feed and finish wheel retraction after dia. is ground to size 

The measuring head is a Swing ARM Type with LVDT Transducers including Inter Changeable Caliper for Diameters from 7mm to 65mm or 65mm to 125mm.Diamond contact Points, Dashpot Assembly for mounting head to the machine.

Consisting of Electronic Controller with Digital of Least count 0.001mm having Three Control output for coarse feed, fine feed and to finish controls. The measuring head is a Swing Arm Type with LVDT Transducers including Inter Changeable Caliper for diameters from 7mm to 65mm OR 65mm to 125mm with Diamond contact points, with Dashpot Assembly for Mounting the measuring head to the machine